SF-LBS Analog Flexo Plates

Color Change, Removable Base

SF-LBS is a new type of analog sheet photopolymer specifically designed for Japanese and Korean corrugated market. It has the same performance as SF-L series with additional color change function, and the base can be easily removed. It provides excellent solids coverage, while its low tack and high resilience offer long and clean press runs.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

Super color contrast after main exposure

Holds the finest detail without the need to back mask

Image fidelity for high-end graphic and halftone reproduction at all gauges

Good resistance, high durability and no cupping allows for uniform impression at all process speeds

Compatible with water and alcohol-based inks containing up to 15% acetate

Suitable for corrugated post printing and other paper substrates

Technical specifications

Thickness (mm/inch)	Hardness (Shore Å)	Total Range(%)	Screen Ruling(LPI)	Minimum Isolated Line	Minimum Isolated Dot
3.94/0 .155	37	3 ‒ 90%	80	0.3mm	0.5mm
5.50/0 .217	35	3 ‒ 90%	60	0.3mm	0.5mm
7.00/0 .275	34	3 ‒ 90%	60	0.3mm	0.5mm

Recommended Processing Conditions

Thickness (mm/inch)	Back Exposure (s)	Main Exposure (mins)	Wash out (mm/mins)	Drying Time (h)	Post Exposure (mins)	Detack(mins)
3.94/0 .155	80-130	8月15日	90-110	2-2.5	5min	0
5.50/0 .217	200-300	8月18日	70-90	3	5min	0
7.00/0 .275	600-700	8月18日	70-90	3	5min	0

*Run-Length varies with its printing conditions and imaging content

Recommended Products

SF-LBS Analog Flexo Plates

SF-LBS is a new type of analog sheet photopolymer specifically designed for Japanese and Korean corrugated market. It ha...

SF-L Analog Flexo Plates

SF-L is the next generation sheet photopolymer specifically designed to address all direct print corrugated board requir...

SF-GT Analog Flexo Plates

SF-GT is the next generation sheet photopolymer specifically designed to address all direct print corrugated board requi...

Latest updates

View all news

Oct 12,2026

How to Prevent Flexo Plate Edge Lift: Causes and Solutions

Plate edge lift is one of the most common—and most frustrating—problems in flexographic printing. When a plate edge lifts from the mounting tape, ink transfers to areas that should be unprinted, causi...

Sep 28,2026

The Flexo Plate Making Process: A Step-by-Step Guide to Quality Plates

A flexographic printing plate is only as good as the process that made it. Back exposure, main exposure, washout, drying, post-exposure, and detacking—each step builds on the one before. If back expos...

Sep 23,2026

Flexo Ink Transfer: Why It Fails and How to Troubleshoot It

Flexographic printing depends on a precisely controlled sequence of ink transfers: from the ink fountain to the anilox roll, from the anilox roll to the printing plate, and finally from the plate to t

Sep 10,2026

How to Choose the Right Flexo Plate Hardness for Your Substrate

Flexo plate hardness—measured on the Shore A scale—is one of the most important specifications for print quality. A plate that is too soft compresses too much under pressure, causing dot gain and slur...