SF-DG Digital Flexo Plates

Medium Hard for Paper Packaging

SF-DG is a medium durometer digital sheet photopolymer, which delivers higher quality print and increased productivity. SF-DG sheet photopolymer has exceptional resilience, allowing for faster press speeds and reduced bounce. Ink transfer is enhanced, delivering extremely smooth solids and crisp, clean running process.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

A softer digital plate than SF-DGL, which is suitable for label and tags, folding cartons, and sacks, paper, multiwall printing

Increased productivity and data transfer without loss of quality due to digital workflow

Consistency in quality when repeating plate processing

Cost effective and more environmentally friendly in processing, as no film is required

Excellent ink transfer using water and alcohol-based inks

Suitable for labels, tags, flexible packaging, sacks, folding carton, films and so on

Technical specifications

Thickness (mm/inch)	Hardness (Shore Å)	Total Range(%)	Screen Ruling(LPI)	Minimum Isolated Line	Minimum Isolated Dot
1.70/0.067	62	1 ‒ 98%	150	0.1mm	0.15mm
2.54/0.100	55	2 ‒ 95%	150	0.1mm	0.15mm
2.84/0.112	54	2 ‒ 95%	130	0.15mm	0.2mm

Recommended Processing Conditions

Thickness (mm/inch)	Back Exposure (s)	Main Exposure (mins)	Wash out (mm/mins)	Drying Time (h)	Post Exposure (mins)	Detack(mins)
1.70/0.067	50-70	10-15	140-180	1.5-2	5min	4min
2.54/0.100	20-50	10-15	130-170	2-2.5	5min	4min
2.84/0.112	20-50	10-15	120-140	2-2.5	5min	4min

*Run-Length varies with its printing conditions and imaging content

Recommended Products

SF-LBS Analog Flexo Plates

SF-LBS is a new type of analog sheet photopolymer specifically designed for Japanese and Korean corrugated market. It ha...

SF-L Analog Flexo Plates

SF-L is the next generation sheet photopolymer specifically designed to address all direct print corrugated board requir...

SF-GT Analog Flexo Plates

SF-GT is the next generation sheet photopolymer specifically designed to address all direct print corrugated board requi...

Latest updates

View all news

Sep 28,2026

The Flexo Plate Making Process: A Step-by-Step Guide to Quality Plates

A flexographic printing plate is only as good as the process that made it. Back exposure, main exposure, washout, drying, post-exposure, and detacking—each step builds on the one before. If back expos...

Sep 23,2026

Flexo Ink Transfer: Why It Fails and How to Troubleshoot It

Flexographic printing depends on a precisely controlled sequence of ink transfers: from the ink fountain to the anilox roll, from the anilox roll to the printing plate, and finally from the plate to t

Sep 10,2026

How to Choose the Right Flexo Plate Hardness for Your Substrate

Flexo plate hardness—measured on the Shore A scale—is one of the most important specifications for print quality. A plate that is too soft compresses too much under pressure, causing dot gain and slur...

Sep 01,2026

UV-CTP Plates: How They Work and Where They Fit in Printing Production

Computer-to-plate technology has transformed the printing industry, replacing film-based workflows with direct digital imaging. Within CTP, two main plate types dominate: thermal CTP and UV-CTP. UV-CT