UV-CTP-SII High Sensitive CTCP Plate

UV-CTP-SII High Sensitive CTCP Plate is designed for advanced customers who use UV-CTP Plates. It has the characteristics of high sensitivity, long running time, and can be used with UV ink printing.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

High Sensitivity

Long runs on press without post-baking

Resistant to UV inks and solvents

Compatible with different developers

Technical specifications

Type	Positive UV-CTP Plate
Spectral Sensitivity	400~410nm
Exposure Energy	40~50 mj/c㎡
Resolution	200 lpi ( 2~98%)
Developing Time	20~30 seconds ( STRONG Solution: Water=1:4,23±2℃)
Run-Length	50,000~100,000 (UV-INK) 100,000~200,000 (Conventional Ink, Unbaked)

*Run-Length varies with its printing conditions and imaging content

Recommended Products

Single Layer UV CTP Offset Printing Plate

The Single Layer UV CTP Offset Printing Plate is a positive working plate for CTCP-UV imaging with a spectral sensitivit...

UV-CTP-SII Double layer UV-CTP Plate

UV-CTP-SII Positive Double layer Thermal Plate is a highly chemically resistant positive working plate for CTCP-UV imagi...

UV-CTP-SII High Sensitive CTCP Plate

UV-CTP-SII High Sensitive CTCP Plate is designed for advanced customers who use UV-CTP Plates. It has the characteristic...

Latest updates

View all news

Oct 30,2026

Flexo Plate Migration Risk in Food Packaging: What Printers and Brands Need to Verify

Food packaging compliance discussions usually focus on ink and substrate. The printing plate sits upstream, and the common assumption is that it never touches the final product—so it generates no comp...

Oct 28,2026

How Liner Type Affects Flexo Plate Selection for Corrugated Printing

Corrugated board is often discussed as a single substrate, but the printing surface—the liner—varies widely. Uncoated kraft liner is rough and absorbent. Recycled liner contains varying fiber quality ...

Oct 22,2026

How to Choose Flexo Plate Thickness for Corrugated Printing

Corrugated board is not a flat surface. The flutes create peaks and valleys, and the liner varies in roughness and absorbency. Plate thickness is the first physical buffer between the press and that u

Oct 12,2026

How to Prevent Flexo Plate Edge Lift: Causes and Solutions

Plate edge lift is one of the most common—and most frustrating—problems in flexographic printing. When a plate edge lifts from the mounting tape, ink transfers to areas that should be unprinted, causi...