UV-CTP-SII Double layer UV-CTP Plate

UV-CTP-SII Positive Double layer Thermal Plate is a highly chemically resistant positive working plate for CTCP-UV imaging with a spectral sensitivity of 400-420 nm. With a high sensitivity of 40 mJ/cm2 and high resolution, it is able to reproduce random screens up to 20 µm. It enables long runs without post-baking, whether using UV inks, metallic or conventional inks. Compatible with major developers with good development latitude.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

High sensitivity - high productivity

Excellent resolution

Wide developing latitude

Resistant to UV inks and solvents

Compatible with the main conventional developers

Technical specifications

Type	Positive working CTcP-UV
Substrate	Electromechanical grained and anodized aluminium
Coating Color	Blue
Plate Gauges	0,15 / 0,15 P / 0,20 / 0,30 / 0,40 mm
Application	Sheet-fed and Coldset / Heatset web presses
Laser Characteristics	UV - Ultraviolet
Spectral Sensitivity	400-420 nm
Energy Required	40-50 mJ/cm²
Screen Reproduction	2 - 99% @ 300 l.p.i.
Resolution	Up to 3200 d.p.i. and FM screen 20 µm
Safelight	White 1 h / Yellow 6 h
Development	Use Strong developers and replenishers
Processing Conditions	Temperature: 22 ±1˚ C Dev. Time: 20-25 seconds
Finishing Gum	Use Strong Gum for standard process
Run Length	200.000 impressions – UV ink 500.000 impressions – Conventional ink
Shelf Life	24 months
Storage Conditions	Temperature: Up to 30˚C Relative Humidity: Up to 70%
Shelf Life	24 months
Storage Conditions	Temperature: Up to 30˚C Relative Humidity: Up to 70%

*Run-Length varies with its printing conditions and imaging content

Recommended Products

Single Layer UV CTP Offset Printing Plate

The Single Layer UV CTP Offset Printing Plate is a positive working plate for CTCP-UV imaging with a spectral sensitivit...

UV-CTP-SII Double layer UV-CTP Plate

UV-CTP-SII Positive Double layer Thermal Plate is a highly chemically resistant positive working plate for CTCP-UV imagi...

UV-CTP-SII High Sensitive CTCP Plate

UV-CTP-SII High Sensitive CTCP Plate is designed for advanced customers who use UV-CTP Plates. It has the characteristic...

Latest updates

View all news

Oct 12,2026

How to Prevent Flexo Plate Edge Lift: Causes and Solutions

Plate edge lift is one of the most common—and most frustrating—problems in flexographic printing. When a plate edge lifts from the mounting tape, ink transfers to areas that should be unprinted, causi...

Sep 28,2026

The Flexo Plate Making Process: A Step-by-Step Guide to Quality Plates

A flexographic printing plate is only as good as the process that made it. Back exposure, main exposure, washout, drying, post-exposure, and detacking—each step builds on the one before. If back expos...

Sep 23,2026

Flexo Ink Transfer: Why It Fails and How to Troubleshoot It

Flexographic printing depends on a precisely controlled sequence of ink transfers: from the ink fountain to the anilox roll, from the anilox roll to the printing plate, and finally from the plate to t

Sep 10,2026

How to Choose the Right Flexo Plate Hardness for Your Substrate

Flexo plate hardness—measured on the Shore A scale—is one of the most important specifications for print quality. A plate that is too soft compresses too much under pressure, causing dot gain and slur...