Single Layer UV CTP Offset Printing Plate

The Single Layer UV CTP Offset Printing Plate is a positive working plate for CTCP-UV imaging with a spectral sensitivity of 400-420 nm. It has high sensitivity and resolution, capable of reproducing random screens up to 20 µm. It is suitable for medium to long runs on sheetfed and commercial webs. It can be post-baked, and long runs can be printed after baking. The main CTCP platemakers on the market have certified SUVP.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

High sensitivity and resolution

Wide developing latitude

Excellent performance on press

For medium-long runs

Compatible with all conventional developers

Technical specifications

Type	Positive working UV-CTP
Substrate	Electromechanical grained and anodized aluminium
Coating Color	Teal (Green-Blue)
Plate Gauges	0,15 / 0,15 P / 0,20 / 0,30 / 0,40 mm
Application	Sheet-fed and Web presses
Laser Characteristics	UV - Ultraviolet
Spectral Sensitivity	400 - 420 nm
Energy Required	50-60 mJ/cm²
Screen Reproduction	2 - 99% @ 300 l.p.i.
Resolution	Up to 3200 d.p.i. and FM screen 20 µm
Safelight	White 1 h / Yellow 6 h
Development	Use Strong developers and replenishers
Processing Conditions	Temperature: 23 ±1˚ C Dev. Time: 25 ±5 seconds
Finishing Gum	Processing Conditions Use Strong Gum for standard and for baking processess
Run Length	100.000 impressions 800.000 impressions – post-baked
Shelf Life	24 months
Storage Conditions	Temperature: Up to 30℃ Relative Humidity: Up to 70%

*Run-Length varies with its printing conditions and imaging content

Recommended Products

Single Layer UV CTP Offset Printing Plate

The Single Layer UV CTP Offset Printing Plate is a positive working plate for CTCP-UV imaging with a spectral sensitivit...

UV-CTP-SII Double layer UV-CTP Plate

UV-CTP-SII Positive Double layer Thermal Plate is a highly chemically resistant positive working plate for CTCP-UV imagi...

UV-CTP-SII High Sensitive CTCP Plate

UV-CTP-SII High Sensitive CTCP Plate is designed for advanced customers who use UV-CTP Plates. It has the characteristic...

Latest updates

View all news

Oct 28,2026

How Liner Type Affects Flexo Plate Selection for Corrugated Printing

Corrugated board is often discussed as a single substrate, but the printing surface—the liner—varies widely. Uncoated kraft liner is rough and absorbent. Recycled liner contains varying fiber quality ...

Oct 22,2026

How to Choose Flexo Plate Thickness for Corrugated Printing

Corrugated board is not a flat surface. The flutes create peaks and valleys, and the liner varies in roughness and absorbency. Plate thickness is the first physical buffer between the press and that u

Oct 12,2026

How to Prevent Flexo Plate Edge Lift: Causes and Solutions

Plate edge lift is one of the most common—and most frustrating—problems in flexographic printing. When a plate edge lifts from the mounting tape, ink transfers to areas that should be unprinted, causi...

Sep 28,2026

The Flexo Plate Making Process: A Step-by-Step Guide to Quality Plates

A flexographic printing plate is only as good as the process that made it. Back exposure, main exposure, washout, drying, post-exposure, and detacking—each step builds on the one before. If back expos...