SP-II Positive PS Printing Plate

With its features of stable performance,high sensitivity, wide developing tolerance and long run-length, SP-II Positive PS Printing Plate has been in good grace SP-II of customers worldwide since the launch in.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

Good Stability

Wide developing tolerance

High Sensitivity

Compatible with different developers

Technical specifications

Type	Positive Uv-CTP Plate
Spectral Sensitivity	400~410nm
Exposure Duration	30 Seconds Approx 20 Pulses(3kwlodine-Gallium lamp,from lm, UGRA PCW82 control stripthe third section un-inking) *Duration varies with its printing conditions and materials.
Resolution	200 lpi ( 2~98%)
Safelight	Yellow Light
Developing Time	20~30 seconds ( STRONG Solution: Water=1:7,23±2℃)
Run-Length	50,000~100,000 (Unbaked) 100,000~200,000(Baked)

*Run-Length varies with its printing conditions and imaging content

Recommended Products

SP-II High Sensitive CTP Printing Plate

SP-II High Sensitive CTP Printing Plate is a solid positive analog plate for medium to long runs, suitable for 320-450 n...

SP-II Positive PS Printing Plate

With its features of stable performance,high sensitivity, wide developing tolerance and long run-length, SP-II Positive ...

Latest updates

View all news

Oct 12,2026

How to Prevent Flexo Plate Edge Lift: Causes and Solutions

Plate edge lift is one of the most common—and most frustrating—problems in flexographic printing. When a plate edge lifts from the mounting tape, ink transfers to areas that should be unprinted, causi...

Sep 28,2026

The Flexo Plate Making Process: A Step-by-Step Guide to Quality Plates

A flexographic printing plate is only as good as the process that made it. Back exposure, main exposure, washout, drying, post-exposure, and detacking—each step builds on the one before. If back expos...

Sep 23,2026

Flexo Ink Transfer: Why It Fails and How to Troubleshoot It

Flexographic printing depends on a precisely controlled sequence of ink transfers: from the ink fountain to the anilox roll, from the anilox roll to the printing plate, and finally from the plate to t

Sep 10,2026

How to Choose the Right Flexo Plate Hardness for Your Substrate

Flexo plate hardness—measured on the Shore A scale—is one of the most important specifications for print quality. A plate that is too soft compresses too much under pressure, causing dot gain and slur...