CTP-G Double layer Thermal CTP Plate

The CTP-G double-layer thermal CTP plate is manufactured on modern, fully automated production lines. It has high sensitivity and resolution and is suitable for duplicating FM random screens up to 20 μm. It can be used for both packaging and commercial printing with or without UV inks. It is suitable for heatset and coldset web and sheet-fed presses, also for printing with metallic inks. CTP-G is compatible with the main developers on the market and has a very good development latitude.

Key Features
Advantage
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Advantage

High sensitivity and high resolution

Excellent resolution

Long runs on press without post-baking

Resistant to UV inks and solvents

Compatible with different developers

Technical specifications

Type	Positive working thermal
Substrate	Electromechanical grained and anodized aluminium
Coating Color	Dark blue
Plate Gauges	0,15 / 0,15 P / 0,20 / 0,30 / 0,40 mm
Application	Sheet-fed and Coldset / Heatset web presses
LaserCharacteristics	IR - Infrared laser
Spectral Sensitivity	800-830 nm
Energy Required	120-130 mJ/cm²
Screen Reproduction	1 - 99% @ 400 l.p.i.
Resolution	Up to 5080 d.p.i. and FM screen 20 µm
Safelight	Daylight handling
Development	Use Strong developers and replenishers
Processing Conditions	Temperature: 23 ±1˚ C Dev. Time: 25 ±5 seconds
Finishing Gum	Use Strong Gum for standard process
Run Length	200.000 impressions – UV ink 500.000 impressions – Conventional ink
Shelf Life	18 months
Storage Conditions	Temperature: Up to 30˚ C Relative Humidity: Up to 70%

*Run-Length varies with its printing conditions and imaging content

Recommended Products

STP-SL Double layer Thermal CTP Plate

STP-SL Double layer Thermal CTP Plate has high chemical resistance when printing. Designed to provide printers with exce...

CTP-G Double layer Thermal CTP Plate

The CTP-G double-layer thermal CTP plate is manufactured on modern, fully automated production lines. It has high sensit...

STP-SL Grade A Positive Thermal Ctp Plate

STP-SL Grade A Positive Thermal CTP Plate is a highly sensitive, high-definition thermal CTP printing plate with the adv...

Latest updates

View all news

Oct 12,2026

How to Prevent Flexo Plate Edge Lift: Causes and Solutions

Plate edge lift is one of the most common—and most frustrating—problems in flexographic printing. When a plate edge lifts from the mounting tape, ink transfers to areas that should be unprinted, causi...

Sep 28,2026

The Flexo Plate Making Process: A Step-by-Step Guide to Quality Plates

A flexographic printing plate is only as good as the process that made it. Back exposure, main exposure, washout, drying, post-exposure, and detacking—each step builds on the one before. If back expos...

Sep 23,2026

Flexo Ink Transfer: Why It Fails and How to Troubleshoot It

Flexographic printing depends on a precisely controlled sequence of ink transfers: from the ink fountain to the anilox roll, from the anilox roll to the printing plate, and finally from the plate to t

Sep 10,2026

How to Choose the Right Flexo Plate Hardness for Your Substrate

Flexo plate hardness—measured on the Shore A scale—is one of the most important specifications for print quality. A plate that is too soft compresses too much under pressure, causing dot gain and slur...