SF-L Negative Processless DOP Plate

SF-L Negative Processless DOP Plate is the next generation sheet photopolymer specifically designed to address all direct print corrugated board requirements. SF-L DOP Plate provides excellent solids coverage, while its low tack and high resilience offer long and clean press runs.

Key Features
Technical specifications

Key Features

Holds the finest detail without the need to back mask

Quick wash out

Requires minimum impression settings, giving good balance between solids and screens

Technical specifications

Thickness (mm/inch)	Hardness (Shore Å)	Total Range(%)	Screen Ruling(LPI)	Minimum Isolated Line	Minimum Isolated Dot
2.54/0.100	49	3 ‒ 95%	100	0.3mm	0.5mm
2.84/0.112	48	3 ‒ 95%	100	0.3mm	0.5mm
3.18/0.125	46	3 ‒ 95%	100	0.3mm	0.5mm
3.94/0.155	43	3 ‒ 90%	80	0.3mm	0.5mm
4.70/0.185	41	3 ‒ 90%	80	0.3mm	0.5mm
5.50/0.217	41	3 ‒ 90%	60	0.3mm	0.5mm
7.00/0.275	40	3 ‒ 90%	60	0.3mm	0.5mm

Recommended Processing Conditions

Thickness (mm/inch)	Back Exposure (s)	Main Exposure (mins)	Wash out (mm/mins)	Drying Time (h)	Post Exposure (mins)	Detack(mins)
2.54/0.100	10-40	8-15	130-150	1.5-2	5min	0-5min
2.84/0.112	20-50	8-15	120-140	1.5-2	5min	0-5min
3.18/0.125	30-60	8-15	120-140	1.5-2	5min	0-5min
3.94/0.155	40-80	8-15	90-110	2-2.5	5min	0-5min
4.70/0.185	90-110	8-18	70-90	3	5min	0-5min
5.50/0.217	150-200	8-18	70-90	3	5min	0-5min
7.00/0.275	300-500	8-18	70-90	3	5min	0-5min

*Run-Length varies with its printing conditions and imaging content

Recommended Products

SP-II High Sensitive CTP Printing Plate

SP-II High Sensitive CTP Printing Plate is a solid positive analog plate for medium to long runs, suitable for 320-450 n...

STP-SL Double layer Thermal CTP Plate

STP-SL Double layer Thermal CTP Plate has high chemical resistance when printing. Designed to provide printers with exce...

CTP-G Double layer Thermal CTP Plate

The CTP-G double-layer thermal CTP plate is manufactured on modern, fully automated production lines. It has high sensit...

Latest updates

View all news

Sep 10,2026

How to Choose the Right Flexo Plate Hardness for Your Substrate

Flexo plate hardness—measured on the Shore A scale—is one of the most important specifications for print quality. A plate that is too soft compresses too much under pressure, causing dot gain and slur...

Aug 31,2026

UV-CTP Plates: How They Work and Where They Fit in Printing Production

Computer-to-plate technology has transformed the printing industry, replacing film-based workflows with direct digital imaging. Within CTP, two main plate types dominate: thermal CTP and UV-CTP. UV-CT

Aug 25,2026

Digital vs. Analog Flexo Plates: Which One Should You Choose for Your Packaging Production?

Packaging printers considering flexographic printing face an important decision early in the plate selection process: digital or analog? Both technologies use photopolymer materials to create relief p

Aug 15,2026

How Flexographic Printing Plates Solve the Corrugated Board Printing Challenge

Corrugated board is one of the most widely used packaging materials in the world—but it is also one of the most challenging surfaces to print on. The fluted structure of corrugated board creates an un...